Canon Pixma TS9120 Printer Wireless Setup Process – Canon.com/ijsetup

 Here is the Canon TS9120 Printer user guide to understand the Wireless Setup Process. These guidelines can assist, if you are a new user and do not know how to begin Canon pixma ts9120 setup.

Collect the requirements to start Canon Pixma TS9120 Printer Wireless Setup

• Wireless network credentials.
• Needed cables to attach the device.

Wi-Fi Direct

Make sure if the Wi-Fi direct feature is well-matched to use with the model, Canon Pixma TS9120. If yes, follow the steps below to make active the connection.

• To begin with, navigate to the printer control panel.
• Search to find the Wi-Fi direct menu.
• Turn ON, Wi-Fi directs.
• Follow the on-screen plan that appear.
• The network link will be lively after a while.
• If you are printing from the mobile device, enable the Wi-Fi direct settings and add the Printer to continue.

How to troubleshoot Canon Pixma TS9120 Printer Wireless Setup errors?
Instructions are below to troubleshoot Canon Pixma TS9120 Printer Wireless Setup errors.

• Confirm and verify the Wi-Fi direct settings.
• Rearrange the device once and ensure if the errors resolve.
• Verify if alternate network connection methods are well-matched. If yes, switch to a different connection and monitor the performance.
• Read and understand Canon Pixma TS9120 setup guidelines obviously before execution.

Update the Printer software, if the network connection is setup .If the network connection is setup, visit www.canon.com/ijsetup the compatible driver download page to find the matching software. You can now carry out the remaining Canon Pixma TS9120 setup steps.

If you need any guidance to start Canon Pixma TS9120 setup and troubleshoot the errors, get help .Just visit our site canon.com/ijsetup.

How to Connect My Canon Pixma MG3620 Wi-Fi?

 If you are in require to get the information on Canon Pixma MG3620 network configuration, then here are the steps for the network configuration to the printer. Here are the steps and direction for the network configuration on the printer.

What are the steps to configure the network to Canon Pixma MG3620 to wifi?

• If you want to configure the network to the Canon Pixma MG3620 via canon.com/ijsetup, then at this time are the steps for the network configuration.
• After that, you require to tap on the wireless option on the control panel.
• Next you must tap on your router name and enter the password to attach the network.
• Lastly, you need to make sure that the blue light is flashing on the printer panel.
• If yes, then the network is established to the printer.

How to connect the Canon Pixma MG3620 to the network using the WPS way?

• If you are wishing to get the network configurations to the printer using the WPS way.
• You need to make the checklist and ensure that the printer and the router are well-matched with the WPS way. 
• For this, you require to verify that the manual of both the printer and the router.
• Only after this, you can able to confirm that the printer and the router are well-matched with the WPS way.
• To verify this, you need to make sure that the printer and the router has the WPS push button.
• If yes, after that you need to tap on the WPS push button on the router and the printer.
• Provide the right of entry to the printer to search for the accessible network.
• Only after this, you will get the network configuration to the printer.
• Now you can confirm that the blue light flashed on the printer panel.
• If yes then you can start to enjoy the printing on the Canon printers.

Steps to connect the Canon printer with the WI-FI direct

• You require opening the setting option.
• Then select the network setup on the Canon printer.
• Now you need to choose the wireless direct option from the accessible list.
• Next, you require arranging the network to the printer.
• After the network configuration, you can start to print using the Canon printer.

For more information on How to connect my Canon Pixma MG3620? Get in touch with expert team via www.canon.com/ijsetup

FAQ for Canon Printer Setup, Driver Download and Troubleshooting – Canon.com/ijsetup

 Installing the Canon Printer- guidelines 

• In the beginning, unload the Canon printer package and verify for the contents.
• Next, connect the printer to power using the power adapter.
• After that, select the language, set date, and time.
• Next, unpack the ink cartridges and load them quietly in to their slots.
• Fan a stack of optional paper and put it on the input tray.
• The Canon printer aligns the cartridges and prints the alignment page.
• This ends the Canon.com/ijsetup.

My Canon Printer wireless connection steps 

• Initial, navigate to the Canon printer panel.
• Next, right of entry the Dashboard and select the Network menu.
• Then, go to settings and select Wireless Setup Wizard.
• After that, the canon ij scan utility for the available network.
• When the list appears, choose yours and enter the password.
• Lastly, the printer panel will set up a successful connection.

Wireless Printer on Mac device?

• Initially, click the Apple icon and select click System Preferences.
• Next, click printers and Scanners icon
• Next, tap + sign to add the printer.
• At last, the Add printer to the system will get displayed in the printers list configured. 

How install Canon Printer driver without installation CD?

• Reach the www.Canon.com/ijsetup using a web browser.
• Enter the model number of the printer and tap Go.
• After that, click Drivers and downloads.
• Please choose the operating system and its version.
• Click Download and start to install it by enabling the system preferences option. 

How to link the Canon Printer to the Computer? 

• At primary, connect the computer and the printer to the same wireless network.
• You can also connect using the USB wire that came along the printer.

Source

Canon Pixma MG3022 Setup and Install

 Meet the PIXMA MG3022 Wireless Inkjet All-In-One, an affordable wireless printer for all your home printing, scanning and copying needs.

Canon Pixma MG3022 First Time Setup:

• Clear away the stickers and tapes located on the MG3022 printer’s outer surface by unboxing it.

• Verify that there is no reparation present on the model of your device. Make sure that the area in which you place the printer has best temperature and pressure.

• Now, plug the power wire to the rear of your Canon PIXMA MG3022 printer and the outlet. Turns On after you power press the ON/OFF button.

• Now, open the cartridge, load sufficient quantity of the needed paper, and close it. Install the shipped ink cartridges into the slot present on your Canon Pixma MG3022 printer & Download the driver for your Canon PIXMA MG3022 printer from this page and then launch it.

Canon PIxma MG3022 Connect Wireless

• Previous to start with the printer configuration, ensure that the wireless router is correctly setup.

• Then, if the printer is not connected, then plug in the printer and turn it on by press the power button. After the printer will turn on, the power light lamp will turn green. Next, press the Wi-Fi button until the light then to it begin to flash.

• More, you have to again press the Wi-Fi button. Press the button frequently awaiting the Network lamp lits up .Next; press the “Color” button for effectively linking the printer to the wireless network.

• Confirm that WiFi should blink quickly and Power light should be lit.

• This completes the printer configuration.

Canon Pixma MG3022 Driver Installation

• Initially, attach your system with the wireless connection method. Attach your printer with the same network as your printer. Too, load paper and ink in the printer earlier than you begin with the installation.

• At the present, to install the driver you can also use the printer driver installation CD. For installing, software with CD, first, put in the Installation CD in the CD drive. After that, go to “My Computer”, on your desktop. Next, open the CD drive disk. In the next window, you will get your setup file right here.

• You can also download the driver setup file by , “canon.com/ijsetup”. Click the “Setup” option and enter your model number i.e. MG3022. Next, click the “Download” tab. After downloading, open the Downloads folder.

• After that, twice-click the downloaded file.

• If prompted, then permit the application to open on your system by click the “Open” tab. You might also obtain the User Account Control panel. This is to allow the application for making the required changes on your machine. Permit the application by clicking the “Yes” button.

• If you are a Mac user, then a setting up window will appear. Click the “Next” option. Additional, you will be asked to supply the Mac administrator username and password. give the required identification and click the “Install assistant” button.

• Now, the Installation Wizard tries to get together information concerning the newest drivers and software. Wait for the conclusion of the procedure. Then, you have to select a region or country, you are living in.

• Click the “Next” tab. In the License Agreement window, cautiously read the document. Once reading agree to it by clicking the “Yes” tab. If you disagree with it and click the “No” tab, then the installation procedure will get irrecoverable right there.

• After that, Canon requests you to participate in the extensive Survey Programmed. For this, read the whole information and if preferred to participate, then click the “Agree” tab. In case, you don’t want to participate, and then hit the “Do not agree” button.

• Now, the Firewall Setting window will come into view. Now, you have to tick mark the “Deactivate the block” checkbox. You will get this window only if you have Software safety on your system.

• Afterward, click the “Next” tab. This will take you to the link Method screen. Click the “Yes” button to move more with the progression.

• If the “Choose Wireless Router” screen will come into view, then you have to choose your wireless router and enter the password for linking your system with the wireless connection. Additional, click the “Next” tab. It will start setting up the connection. Once the Connection of the procedure, you will see the Connection finished screen. Click the “Next” tab to move further with the process.

• This will start the downloading of your printer drivers. Wait for the finishing point of the procedure

• Mac users will get an “Add Printer” window. Now, click “Add Printer” and then select your Canon Pixma MG3022 from the list. After choosing, click “Add”. This will bring you back to the installation wizard. After that, click the “Next” tab.

• After that, the Print Head Alignment screen will come into view. Begin the position by clicking the “carry out” tab and follow the on-screen commands to whole the process.

• Previously the procedure gets finished; click the “Next” tab. After that, you will be asked to begin the “Test Print”. If you want to start the test, then click the “Execute” button followed by clicking the “Next” tab, after conclusion of the test print. To skip the text, straight click the “Next” button and go further.

• In the setup completion window, click the “Next” tab. Next, you will be asked to choose the software you desire to install on your system. Tick marks the checkboxes after that to the preferred software and then clicks the “Next” tab.

• This will start the software installation progression.

• While the installation gets finished, click the “Exit” button and come out of the setting up wizard.

For more assistance visit www.canon.com/ijsetup to complete Canon Pixma MG3022 Setup and Install guide, get help from our support team .

Source